Welded Boss Crane Rail Clips

W (Plain Series)
W (Plain Series)
Welded Boss Crane Rail Clips
W (Pressure Block)
W (Pressure Block)
  • For rail sizes from 30 ASCE to 175 CR.

  • Bosses up to 2" in diameter.

  • Lateral load capacities in excess of 50kips.

  • Single bolt installation using up to 1 1/4" diameter bolt.

  • Available with synthetic pressure block nose or plain nose.

  • Can be used in conjunction with crane rail pad.

  • Advantages: Low height welded boss has internal threads. The boss can be welded to the runway steel by the fabricator using standard electrodes and shipped to site where the rest of the clip is assembled over it.

  • The clip body and cam can be hot dipped galvanised with no reduction in lateral resistance rating. This is because the clip performs as a bearing connection.

  • Installation: Weld the boss to the runway steel. Position the clip body over the boss and against the rail. Position the cam in the body and place the bolt through the eccentric hole and thread into the boss. Rotate the cam to align the rail. Torque the bolt as required.




















YouTube   Facebook  

Sydney
6 Moorlands Road
Ingleburn NSW 2565


Newcastle
1/50 Sandringham Avenue
Thornton NSW 2322


Brisbane
3/12 Sudbury Street
Darra QLD 4076


Mackay
32 Diesel Drive
Paget QLD 4740


Perth
28 Jackson Street
Bassendean WA 6054


Adelaide
2/23 Clovelly Avenue
Royal Park SA 5014


Melbourne
321 Doherty’s Road
Truganina VIC 3029