Through Bolt Crane Rail Clips

CL Series
CL Series
AD, BD, CD Series
AD, BD, CD Series
Through Bolt Crane Rail Clips
CLX Series
CLX Series
W10R, W7R, W5R Series
W10R, W7R, W5R Series
  • For rail sizes from 30ASCE to 175 CR.


  • Studs up to 11/4" in diameter.


  • Lateral load capacity up to 5O kips.


  • Single stud installation welded with standard electrodes.


  • Available with synthetic pressure block nose or plain nose.


  • Can be used in conjunction with crane rail pad.


  • Advantages: Combines engineering efficiency with cost economy. Designed as a bearing type connection, with no eccentric loading of the stud or its weld. The clips are designed so that appreciable bending loads are not developed.


  • The clip body and cam can be hot dipped galvanized with no reduction in lateral resistance rating. This is because the clip performs as a bearing connection.


  • Installation: Weld the stud to the runway steel. Position the clip body over the stud and against the rail. Position the cam in the body with the stud through the eccentric hole. Rotate the cam to align the rail. Install the washer and nut. Torque the nut as required.­­­­




















YouTube   Facebook  

Sydney
6 Moorlands Road
Ingleburn NSW 2565


Newcastle
1/50 Sandringham Avenue
Thornton NSW 2322


Brisbane
3/12 Sudbury Street
Darra QLD 4076


Mackay
32 Diesel Drive
Paget QLD 4740


Perth
28 Jackson Street
Bassendean WA 6054


Adelaide
2/23 Clovelly Avenue
Royal Park SA 5014


Melbourne
321 Doherty’s Road
Truganina VIC 3029